Elenco Surface Mount Technology Kit Manuel d'utilisateur télécharger pdf (Page 7)

-6-

PRACTICE

If you are unfamiliar with soldering surface mount components, it

would help to practice a bit before starting the assembly process. Six

0 ohm resistors, marked (0 / 000), are supplied with the SM-200K kit.

Only two are used in the assembly process. The other four may be

used for practice. Use the PC board area shown in Figure 5. If you

have not already done so, read the soldering tips in the previous

section. Try both of the methods described to see which you prefer.

SOLDER RESISTORS AND CAPACITORS TO PC BOARD

Be sure to read the section on soldering tips. Then follow the step by step instructions below. As each step is

completed, place a check mark in the box next to the instruction.

R4 - 56kΩ Resistor

(563)

R3 - 100kΩ Resistor

(104)

R5 - 10kΩ Resistor

(103)

C2 - .0039µF Capacitor

(value marked on bag)

J1 - 0Ω Resistor

J2 - 0Ω Resistor

(0 / 000)

C1 - .015µF Capacitor

(value marked on bag)

R2 - 1.5MΩ Resistor

R6 - 1.5MΩ Resistor

(155/1504)

R7 - 470Ω Resistor

R8 - 470Ω Resistor

(471)

R1 - 15kΩ Resistor

(153/1502)

0Ω Resistors

Figure 5

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Elenco Surface Mount Technology Kit Manuel d'utilisateur Page 7